#Static mesh enabler innventor 2017 update

In the browser, right-click the part or assembly you want to edit, and click Open.To cancel the simulation in process, click Cancel orДЄfter you run an analysis on your model, you can change the design and rerun the analysis to see the effects of the changes. Create reports based on the optimal results.Repeat the process until you optimize the component.Result convergence is blocked for multiple-time step support and prestressed modal results. To ensure the most accurate results, use result convergence and resolve.

#Static mesh enabler innventor 2017 update

Rerun the simulation to update the results.Solves the base configuration and each parameter change to the base, then interpolates the other results.Д¬urrent configuration only Solves the current configuration as a single point simulation. Solves all combinations of the parameters. Specify the simulation method for parametric geometry:.To re-evaluate all existing data points, right-click the Mesh node, and click Mesh View.Sometimes changes in parameters causes Mesh and Results to become out-of-date, and an iconДisplays next to the browser node.Changes can include adding features or suppressing problematic ones. View the results, and enter changes to refine the design.When ready to start the simulation calculations, click Run.In the Simulate dialog box, expand the More section to see if there are any notifications or warnings that relate to process.In the Simulation Browser, right-click the Simulation node and select Simulate.Д«atch simulations, select multiple simulations in the browser, right-click the selection, and click Simulate. Before you run a simulation, complete all of the steps to define the parameters for the analysis. Hope this helps.Running a simulation produces the FEA results for all the combinations of the defined variables. Keep in mind I believe it keeps as a default when you change that and you may have to go back and return it to whatever units you normally save in. stl file single select the file you want to open so it is highlighted and down at the bottom there is an Options button, click that and it opens a window, under Units there is an Import Units button, switch that to mm or in depending on how your file was saved out originally. Evan, What I did is when you go to open your. stl was open, I click on the part, then right click, select Convert to Base Feature, I selected output to solid, OK and it was done and worked correctly.Д®van, What I did is when you go to open your. stl came in fine and matched what the customer had. So it sees the 12 as the value and the import doesn't know or care what it is but as soon as I changed my import option to mm the. The customer exported in mm and I imported in inch. I opened a customer model and it looked correct until I made a measurement and it was 12' the real measurement was 0.473 or 12mm. stl file (inch or mm) when opening the file and change it in your options to match before opening it to keep it at the correct values. Make sure you know what your units are of the. This next comment doesn't really have anything to do with how the Mesh Enabler works other than how you import then use the Enabler:

Seems to work fine now after Rocky fixed it up.